MICROLIT ULTIMUS
MICROLIT BEATUS
January 5, 2019
MICROLIT E-BURETTE
January 7, 2019
MICROLIT ULTIMUS
with Dual InletTM Technology
MICROLIT ULTIMUS is a Bottle Top Dispenser (BTD) that works on Dual Inlet TechnologyTM. It offers a sophisticated blend of features and functionality, along with four modes of operation.
Description
MICROLIT ULTIMUS is a Bottle Top Dispenser (BTD) that offers a sophisticated blend of features and functionality. Built by our in-house team of product design engineers, it uses Dual Inlet™, an award- winning technology patented in India, the EU and the US.
It offers 4 liquid handling modes – rinsing, dilution, refilling & purging without dismounting the dispenser.
MICROLIT ULTIMUS also features two product innovations: EasyKnob™ and FlexiNozzle™ that enhance its ease of use and flexibility.
Designed with ergonomics and intuitive handling in mind, it exhibits excellent chemical compatibility and helps in achieving precision with reliability in practical laboratory environments.
Modes of Operation
- Standard Dispensing: Knob A – Open, Knob B – Closed In this mode, the dispenser dispenses the liquid normally into the receiver from the bottle it is mounted on.
- Purging: Knob A – Closed, Knob B – Closed In this mode, the liquid is re-circulated into the same bottle on which the dispenser is mounted. This process removes the air from the dispenser, without wasting any reagent.
- Dilution/Rinsing/Second Liquid Dispensing: Knob A – Open, Knob B – Open In this mode, the liquid from a second source can be dispensed into the receiver. The second liquid can be distilled water, thus allowing the user to rinse the instrument without dismounting it or dilute the reagent within the receiver.
- Bottle Refilling: Knob A – Closed, Knob B – Open In this mode, the liquid from a second source can be used to refill the bottle, without dismounting the dispenser.
- Change Volume with EasyKnob™
- Move Effortlessly with a PTFE Piston
- Forget Dismounting with Dual Inlet™
- Dispense Easily with FlexiNozzle™
- Work Flexibly with a 360° Adapter
- Assured Quality with ISO 8655 Conformed Calibration
- Work with a Comprehensive Volume Range
- Autoclaving Parameters
| Model No. | Vol. Range | Increment | Accuracy | CV | ||
|---|---|---|---|---|---|---|
| ± % | ± ml | ± % | ± ml | |||
| ULT-2.5 | 0.25-2.5 ml | 0.05 ml | 0.6 | 0.015 | 0.2 | 0.005 |
| ULT-5 | 0.5-5 ml | 0.1 ml | 0.6 | 0.030 | 0.2 | 0.010 |
| ULT-10 | 1-10 ml | 0.2 ml | 0.6 | 0.060 | 0.2 | 0.020 |
| ULT-30 | 2.5-30 ml | 0.5 ml | 0.6 | 0.180 | 0.2 | 0.060 |
| ULT-60 | 5-60 ml | 1.0 ml | 0.6 | 0.360 | 0.2 | 0.120 |
| ULT-100 | 10-100 ml | 2.0 ml | 0.6 | 0.600 | 0.2 | 0.200 |
The error limits (Accuracy and Coefficient of Variation) mentioned above are in accordance with the nominal capacity (or maximum volume) indicated on the instrument. These are obtained by using the instrument with distilled water at equilibrium, the ambient temperature of 20 °C while operating it smoothly and steadily. The error limits are in accordance with DIN EN ISO 8655-5.
Accessories
Adapters
The instrument comes with five adapters that comfortably fit most laboratory reagent bottles. The available sizes are – 28 mm, 32 mm, 36 mm, 40 mm and 45 mm.
Reservoir Covers
For the second bottle, an additional set of four reservoir covers is provided in the sizes: 32 mm, 36 mm, 40 mm and 45 mm.